YGM High Pressure Suspension Grinder Mill

Henan Ling Heng Machinery has high quality grinding equipment for sale. There are so many types and specification for your reference. YGM Grinder Mill has a large market share in the grinding industry. It is a new type and opens a new era of high-efficiency and low energy consumption.

High Pressure Suspension Grinder Mill is mainly applied to the powder processing of mineral products in the industries of metallurgy, construction materials, chemical, and mining, etc. it can produce powder from various non-flammable and non-explosive mineral materials with Mohs hardness below 9.3 and humidity below 6%, such as quartz, feldspar, calcite, talcum, barite, fluoride, Xircom, cinder, white lime, cement clinker, activated carbon, dolomite, granite, soft coal, coking coal, lignite, magnesia, chromium oxide green, gold ore, red clay, clay, kaolin, coke, coal Gangue, porcelain clay, kyanite, fluorspar, bentonite, medicinal stone liparite, diabase, pyrophyllite, shale red stone, emeraldite, basalt, gypsum, graphite, carborundun, heat insulating material, etc.

Features of the High Pressure Suspension Grinder Mill

1. Compared with the common Raymond grinding mill under the same power conditions, the capacity can be increased by 10%, under the performance of high-pressure springs, the rollers grinding pressure on raw materials can be raised by 1500kgf.

2. All the mineral materials with Mohs hardness below 9.3 can be crushed.

3. The final product size ranges from the maximum particle diameter of 0.95mm (20mesh) to the finest diameter of 0.038mm (400 mesh). A few materials can reach 0.013mm (1000 mesh).

4. Its dust-removing effect fully meets the national dust discharge standard.

5. The classifier is easy for adjustment.

6. The grinding device adopts a superposition multi-grade sealing with good sealing performance.

Working Principle of the High Pressure Suspension Grinder Mill

General: Crushing -- Grinding -- Selecting -- Collecting

Detailed: Materials first enter jaw crusher to be crushed to smaller size. Then they are lift to storage room by elevator. Vibrating feeder will feed materials into grinding room evenly.

When the materials are put into the grinding room of the main equipment, the grinding roll swings outward and presses closely upon the grinding ring due to the centrifugal force in rotation of the main shaft. The shovel carries materials to the space between the grinding roll and grinding ring, and materials are ground as the grinding roll rolling.

After being ground,the qualified powder is selected by Separator via the cycle wind of the blower and the rough powder will be back to the grinding room for regrinding. The qualified powder is brought into the powder collector by airflow. The powder comes out as end products.

3D Model Process Flow of the High Pressure Suspension Grinder Mill

Technical Data of High Pressure Suspension Grinder Mill

Model	Number Of Grinding Roll	Size Of Grinding Roll(mm)	Diameter and Height of Grinding Ring(mm)	Max.Feeding size(mm)	Finished Size(mm) (mm)	Capacity (t/h)	Power (kw)	Overall dimension (m)
YGM65	3	210*150	650*150	15	0.198-0.033	0.4-1.8	15	4100*3300*4500
YGM75	3	260*150	780*150	15	0.198-0.033	1-3	18.5	4300*3500*5100
YGM85	3	270*150	830*150	20	0.198-0.033	1.2-4	22	5300*4100*5200
YGM88	3	300*150	875*150	20	0.198-0.033	1.5-4.5	30	6500*4100*5200
YGM95	4	310*170	950*170	25	0.198-0.033	2.1-6.5	37	7900*5900*9100
YGM130	5	410*210	1280*210	30	0.198-0.033	2.5-11	75	9200*8000*9700

Notice: Note:Any change of technical data shall not be advised additionally.